Kaablid
- Test function for cables with RJ45, RJ12, RJ11 and BNC plug
- Auto-scan and step by step testing
- Loop-back: for testing and localizing of already laid network or communication cables
- Continuity: for continuity testing of network or communication cables
- Open: for localizing of disconnected single wires
- Shorts: locating of short-circuited single wires
- Miss-wire: identification of non-conform wire assignment
- Pin to pin configuration: 1:1 assignment testing
- Main device with 2x RJ45 jack, remote unit with 1x RJ45 jack
- Various LEDs for status display, operates with 9 volts block battery
- Unshielded CAT 5e patch cable;
- 4 x 2 AWG 26/7, twisted pair, 100 Ohm;
- 2 x RJ45 Connectors;
- Boot with kink protection and strain relief;
- Spot length on boot.
- Unshielded CAT 5e patch cable;
- 4 x 2 AWG 26/7, twisted pair, 100 Ohm;
- 2 x RJ45 Connectors;
- Boot with kink protection and strain relief;
- Spot length on boot
- Unshielded CAT 5e patch cable;
- 4 x 2 AWG 26/7, twisted pair, 100 Ohm;
- 2 x RJ45 Connectors;
- Boot with kink protection and strain relief;
- Spot length on boot
- PVC, AWG 26/7, unshielded
- ISO/IEC 11801 and TIA/EIA 568-B
- Unshielded CAT 5e patch cable;
- 4 x 2 AWG 26/7, twisted pair, 100 Ohm;
- 2 x RJ45 Connectors;
- Boot with kink protection and strain relief;
- Spot length on boot
- Suitable for direct assembly of RJ-45 connectors in order to produce patch cords
- Copper conductors
- PoE ready
- Suitable for direct assembly of RJ45 connectors in order to produce patch cords
- Suitable for installations of class E cable lines, 250 MHz
- PoE+ ready
- With LSZH (Low Smoke Zero Halogen) sheath for best fire behavior and low smoke emissions.
- Transparent red colored plug for easy identification of Category 6 (250 MHz)
- Conductor: Copper (Cu)
- PoE+ ready
- Features LSZH sheath for optimal fire behavior and low smoke emissions
- Transparent plug for easy identification of CAT 6
- Copper conductor
- PoE+ ready
- Boots with kink protections and strain reliefs
- Length markings on the sleeve
- PVC
- Boot with kink protection
- Red plug for CAT 6
- PVC
- Boot with kink protection
- Red plug for CAT 6
- Boots with kink protections and strain reliefs
- Length markings on the sleeve
- Boots with kink protections and strain reliefs
- Length markings on the sleeve
- Suitable for direct assembly of RJ45 connectors in order to produce patch cords
- Suitable for installations of class E cable lines, 250 MHz
- PoE+ ready
- Connection over LSA strips
- Included strain relief
- Shielded
- 2 x RJ45 connectors
- Boots with kink protections and strain reliefs
- Plugs with new design
- Spot length on boot
- PVC, AWG 26/7, unshielded
- ISO/IEC 11801 and TIA/EIA 568-B
- PVC, AWG 26/7
- ISO/IEC 11801 and TIA/EIA 568-B
- CAT 5e U-UTP patch cord, PVC
- AWG 26/7
- 2 x RJ-45 connectors
- Boots with kink protections and strain reliefs
- Plugs with special design
- Spot length on boot
- Suitable for building structured cabling in the secondary and tertiary area
- Suitable for installations of class E cable lines, 250MHz
- Conforming to ISO/IEC 11801, DIN EN 50173, DIN EN 50288-5-1
- Total number of insulated conductors: 8, twisted in 4 pairs
- Individual pair shielding: none
- Overall shielding: none
- Future-oriented standards and high-end quality for your network
- Transparent red colored plug for easy identification of Category 6 (250 MHz)
- 2x RJ45 connectors
- Plugs with good design
- Boots with kink protections and strain reliefs
- 2x RJ45 connectors
- Plugs with good design
- Boots with kink protections and strain reliefs
- Shielded RJ-45 sockets
- Suitable for rack mount
- 360° shield coverage
- Dust protection shutter
- Fixing option for cable ties, central ground connection
- Up to 120 meter extension of 4K video contents with a CAT 6 cable (point-to-point connection)
- HDMI signal can be extended (unlimited distance) with the existing local network infrastructure or additional PoE switches (IP connection)
- Fully powered by a PoE switch - no external power supply required
- Supports CAT 5, CAT 5e and CAT 6 network cables
- Supports 4K (30 Hz), 3840 x 2160p resolution
- SC/SC connector
- Halogen free cable
- Connector with ceramic ferrule
- Two color boot